View SFH691608_4302155.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SFH6916
Vishay Semiconductors
Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package
FEATURES
* SOP (small outline package)
A1 C 2
* Isolation test voltage, 3750 VRMS (1.0 s)
16 C 15 E 14 C 13 E 12 C 11 E 10 C 9E
* High collector emitter voltage, VCEO = 70 V * Low saturation voltage * Fast switching times * Temperature stable * Low coupling capacitance * End stackable, 0.050" (1.27 mm) spacing * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
A3 C4 A C A
i179076
5 6 7 8
C
DESCRIPTION
The SFH6916 has a GaAs infrared emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 16 pin 50 mil lead pitch miniflat package. It features a high current transfer ratio, low coupling capacitance, and high isolation voltage. The coupling devices are designed for signal transmission between two electrically separated circuits.
AGENCY APPROVALS
* UL1577, file no. E52744 system code U * DIN EN 60747-5-5 available with option 1
ORDER INFORMATION
PART SFH6916 REMARKS CTR 50 to 300 %, SOP-16
ABSOLUTE MAXIMUM RATINGS
PARAMETER INPUT Reverse voltage DC forward current Surge forward current Total power dissipation OUTPUT Collector emitter voltage Emitter collector voltage Collector current Total power dissipation per channel COUPLER Isolation test voltage between emitter and detector (1.0 s) Isolation resistance Storage temperature range
(1)
TEST CONDITION
SYMBOL VR IF
VALUE 6.0 50 2.5 80 70 7.0 50 100 150
UNIT V mA A mW V V mA mA mW
tp 10 s
IFSM Pdiss VCE VEC IC
tp = 1.0 ms
IC Pdiss
VISO VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C RIO RIO Tstg
3750 1012 1011 - 55 to + 125
VRMS C
Document Number: 83687 Rev. 1.8, 16-May-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 755
SFH6916
Vishay Semiconductors
Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package
(1)
ABSOLUTE MAXIMUM RATINGS
PARAMETER COUPLER Ambient temperature range Junction temperature Soldering temperature (2) Total power dissipation
TEST CONDITION
SYMBOL Tamb Tj
VALUE - 55 to +100 100 260
UNIT C C C mW
max. 10 s dip soldering distance to seating plane 1.5 mm Ptot
700
Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices.
ELECTRICAL CHARACTERISTICS (1)
PARAMETER INPUT (2) Forward voltage Reverse current Capacitance Thermal resistance OUTPUT Collector emitter leakage current Collector emitter capacitance Thermal resistance COUPLER Collector emitter saturation voltage Coupling capacitance IF = 20 mA, IC = 1.0 mA f = 1.0 MHz VCEsat CC 0.1 1.0 0.4 V pF VCE = 20 V VCE = 5.0 V, f = 1.0 MHz ICEO CCE Rthja 2.8 500 100 nA pF K/W IF = 5 mA VR = 6.0 V CO VF IR CO Rthja 1.15 0.01 14 1000 1.4 10 V A pF K/W TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Notes (1) T amb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (2) T amb = 25 C (except where noted).
CURRENT TRANSFER RATIO
PARAMETER Current transfer ratio TEST CONDITION IF = 5.0 mA, VCC = 5.0 V SYMBOL CTR MIN. 50 TYP. MAX. 300 UNIT %
SWITCHING CHARACTERISTICS
PARAMETER NON-SATURATED Rise time Fall time Turn-on time Turn-off time SATURATED Rise time Fall time Turn-on time Turn-off time IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k IF = 16.0 mA, VCC = 5.0 V, RL = 1.9 k tr tf ton toff 15 0.5 1.0 30 s s s s IC = 2.0 mA, VCC = 10 V, RL = 100 IC = 2.0 mA, VCC = 10 V, RL = 100 IC = 2.0 mA, VCC = 10 V, RL = 100 IC = 2.0 mA, VCC = 10 V, RL = 100 tr tf ton toff 4.0 3.0 5.0 4.0 s s s s TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
www.vishay.com 756
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83687 Rev. 1.8, 16-May-08
SFH6916
Optocoupler, Phototransistor Output, Vishay Semiconductors Quad Channel, SOP-16, Half Pitch Mini-Flat Package
IF
R L= 100 IC V CC = 10 V
IF
R L= 1.9 k IC V CC = 5 V
50
isfh6916_02
isfh6916_01
50
Fig. 1 - Switching Operation (Without Saturation)
Fig. 2 - Switching Operation (With Saturation)
SAFETY AND INSULATION RATINGS
PARAMETER Climatic classification (according to IEC 68 part 1) Comparative tracking index Peak transient overvoltage Peak insulation voltage Safety rating - power output Safety rating - input current Safety rating - temperature Creepage distance Clearance distance CTI VIOTM VIORM PSO ISI TSI 5 5 175 6000 707 350 150 175 TEST CONDITION SYMBOL MIN. TYP. 55/100/21 399 V V mW mA C mm mm MAX. UNIT
Note As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS
Tamb = 25 C, unless otherwise specified
1.5 T = - 25 C 1.3 T = 0 C 80
IC - Collector Current (mA)
T = - 55 C
VF - Forward Voltage (V)
70 60 50 40 30 20 10 0 0 2 4 6 IF = 5 mA IF = 20 mA IF = 15 mA IF = 10 mA IF = 30 mA
1.1 T = 100 C T = 75 C T = 50 C T = 25 C 0.7 0.01 0.1 1 10 100
0.9
8
10
isfh6916_03
IF - Forward Current (mA)
VCE - Collector to Emitter Voltage (V)
isfh6916_04
Fig. 3 - Diode Forward Voltage vs. Forward Current
Fig. 4 - Collector Current vs. Collector Emitter Voltage
Document Number: 83687 Rev. 1.8, 16-May-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 757
SFH6916
Vishay Semiconductors
Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package
CTR - Current Transfer Ratio (%)
ICEO - Collector to Emitter Dark Current (nA)
1000 24 V 40 V 100
300 VCE = 5.0 V 250 200 150 100 50 0 0.1 1.0 10.0 50 100.0 Typical for CTR = 250 %
12 V 10
Typical for CTR = 150 %
1 - 60 - 40 - 20 0 20 40 60 80 100
TA - Ambient Temperature (C)
isfh6916_05
isfh6916_09
IF - Forward Current (mA)
Fig. 5 - Collector to Emitter Dark Current vs. Ambient Temperature
100
Fig. 8 - Current Transfer Ratio vs. Forward Current
100
Collector Current (mA)
Switching Time (s)
10 1 0.100 0.010 0.001 0.0
ton 10 toff td 1 ts
IF = 25 mA IF = 10 mA IF = 5.0 mA IF = 2.0 mA IF = 1.0 mA
0.1 0.2 0.4 0.6 0.8 1.0 0 500 1000
VCC = 5.0 V IC = 2.0 mA 1500 2000
VCE(sat) - Collector Emitter Saturation Voltage (V)
isfh6916_06
RL - Load Resistance ()
isfh6916_10
Fig. 6 - Collector Current vs. Collector Emitter Saturation Voltage
Fig. 9 - Switching Time vs. Load Resistance
CTR - Normalized Ouput Current
1.4 1.2
1000
Switching Time (s)
1.0 0.8 0.6 0.4 0.2 Normalized to 1.0 at TA = 25 C IF = 1.0 mA, VCE = 5.0 V
IF = 5.0 mA VCC = 5.0 V TA = 25 C 100 CTR = 150 %
tf ts
10 tr td
1
0.0 - 60 - 40 - 20
0 0 20 40 60 80 100 100 1000 10 000 100 000
TA - Ambient Temperature (C)
isfh6916_07 isfh6916_11
RL - Load Resistance ()
Fig. 10 - Switching Time vs. Load Resistance
Fig. 7 - Normalized Output Current vs. Ambient Temperature
www.vishay.com 758
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83687 Rev. 1.8, 16-May-08
SFH6916
Optocoupler, Phototransistor Output, Vishay Semiconductors Quad Channel, SOP-16, Half Pitch Mini-Flat Package
Input t on t pdon Output 10 % 50 % 90 %
isfh6916_12
t off t pdoff
td
tf
ts
tr 10 % 50 % 90 %
Fig. 11 - Switching Time Measurement
PACKAGE DIMENSIONS in inches (millimeters)
R 0.010 (0.25)
0.19 (4.83) 0.17 (4.32)
0.050 (0.127)
0.014 (0.36) 0.036 (0.91) 0.200 (5.08) 0.290 (7.37) 0.045 (1.14)
0.43 4 (11.02) 0.414 (10.52) IS O method A 0.034 (0.87) 0.024 (0.61) 0.017 ( 0.43) 0.013 ( 0.33) 0.008 ( 0.20) 0.004 ( 0.10)
0.22 0 (5.59) 0.20 0 (5.08) 40 10
0.080 (2.03) 0.075 (1.91) 0.000 (0.00) 0.005 (0.13)
0.018 (0.46) 0.014 (0.36)
i178043
0.200 (5.08) 0.220 (5.59) 0.28 0 (7.11) 0.260 (6.60)
0.05 5 (1.40) 0.04 5 (1.14)
Document Number: 83687 Rev. 1.8, 16-May-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 759
SFH6916
Vishay Semiconductors
Optocoupler, Phototransistor Output, Quad Channel, SOP-16, Half Pitch Mini-Flat Package
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com 760
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83687 Rev. 1.8, 16-May-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of SFH691608

	To Download SFH691608 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .